GoKWh 12V&24V Series LiFePO4 Battery LCD Display Setting Guide

Step 1: Short press “LCD power on/select” button(hereinafter referred to as “Power Button” ), to start the display, long press “SET” button for 2 seconds to enter the mode setting page.

Step 2: Short press “SET” button twice to select “3-F” LiFePO4 mode.

Step 3: Short press “Power” button 4 times to select “04” battery string number.

Press and hold “SET” key for 2 seconds to return to the main page, or press “SET” key briefly to set other modes.

Step 1: Short press “Power” button to start the display, long press “SET” key for 2 seconds to enter the mode setting page.

Step 2: Short press “SET” key for 6 times to enter the low voltage reminder setting mode, and the display will show “00.0 Lo”. Screenshot

Step 3: Short press “Power” button to set the digit, long press “Power” button to shift the digit.

Step 4: Short press “Power” button to confirm and save the value.

*The default power level of the product is lower than 10% and will be reminded automatically.